Cruiser flashing details, few new trick

Cruiser flashing details, few new trick[b]

K800! Cid52 Success Flash

K800! Cid52 Success Flash W/t Out Internet Connection
System diagnostics passed.
Version 12.00 ready!

[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x9900
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Trying CID52 recovery applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 2s
Initializing phone hardware...
Applet ID: 061220 1711 NPA4_CXC1329130_DB2020_...
Flash manufacturer: Intel
Flash ID: 0x897E
OTP Security Level: 1 (Retail)
OTP CID: 49
Phone CID: 52
Phone color: Red
Sending applet...
Applet ID: 061205 1523 HANCXC9876543210_DB2020...
Sending applet...
Applet ID: 061201 1314 HANCXC1329129_DB2020_FL...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK

[ --- Flash Main Firmware --- ]
Flash file: "K800i_CXC1250210_Generic_R1KG001_Red52.ck80sw "
Waiting for flash file to load...
Preparing to program flash...
Baudrate = 921600Bd
The applet ignored baudrate change request!
Programming flash...
Time: 0054
Flash process done.

[ --- Flash Raw File System --- ]
Flash file: "K800i_CXC1250490_Europe1_R1KG001_Red52.ck80fs "
Waiting for flash file to load...
Preparing to program flash...
Baudrate = 921600Bd
The applet ignored baudrate change request!
Programming flash...
Time: 00:05:42
Flash process done.

[ --- Customize File System --- ]
Sending CS applet...
Applet ID: 070410 1557 HANCXC1250562_DB2020_CS...
Initializing CS applet...
Applet ID: 070410 1557 HANCXC1250562_DB2020_CS...
Baudrate = 921600Bd
Starting up GDFS service...
Starting up filesystem, please wait...
Building customization...
Customizing phone...
Done.
Writing CDA Article MS string...
New value: CDA102568/10
Done.
Writing CDA Version MS string...
New value: R9A
Done.
Writing Default Article MS string...
New value: cxc1250490
Done.
Writing Default Version MS string...
New value: R1KG001
Done.
Writing langpack string...
New value: EUROPE_1
Done.
Writing country...
New value: Generic Trade
Done.

[ --- Finalize GDFS --- ]
Turning off phone...
GDFS access terminated.
Phone automatically detached.

BIG THANKS TO MIZAR AND MR_LEAD

Z520i


Attach the Phone
Repair EROM
Flash ARM
Write Raw FS
Customize FS
Shutdown FS

Attach the Phone
Direct Unlock


W900i


Attach the Phone
Unlock RSA
Flash ARM
Write Raw FS
Customize FS
Turn Off the Phone

Attach the Phone
Unlock RSA
Direct Unlock
Restore Firmware
Turn Off the Phone


W550i


Attach the Phone
Unlock RSA
Write Raw FS
Customize FS
Turn Off the Phone

Attach the Phone
Flash ARM



W810i


@@@ Solution W810 Unlock Or Hang @@@
WARNING: full battery + speed 115200 needed

1: attache the phone
2: unlock rsa after the phone dettache auto
3: remove batteri and put again ---attache phone
4: flash ARM with this file "W810i_CXC1250316_Generic_R4CK003_Red49.cw81sw "
5: restore firmware

NOW THE PHONE IS 10000% ALIVE




1.) attach phone
2.) unlock rsa
3.) remove battery
4.) attach battery
5.) attach phone
6.) flash arm (W810c_CXC1250317_China_R4DB005_Red49.cw81sw)
7.) write raw fs (W810c_CXC1250324_China_R4DB005_Red49.cw81fs)
8.) customize fs (if prompted to "unlock rsa" detach phone then do steps 1-5)
if success in "customize fs" go to file system and "shutdown fs" and
restore firmware. (usually phone will turn on) if not do step 9.
9.) after doing steps 1-5, then "customize fs"
10.) shutdown fs
11.) restore firmware
hope this will help you.





k750i CID49 RED dead repair PROCEDURE.
I
test this procedure whit 3 phone K750i whit firmware R1ca021 CID 49RED
and work well so i sticky to help who have dead K750i and stop flashing
at 1% whit R1ca021.

1) Attach the phone but select k750I in the little window.
2) Unlock RSA
3) Attach the phone and Direct Unlock at the end detach phone remove battery and cable and plug in again.
4) Attach the phone and flash FS with this
K750_R1BC002_FS_EU3_CID49.fbn
5) Customize file system
6) Attach the phone and flash SW with K750_R1BC002_MAIN_EU_EMEA_CID49.mbn
7)Turn off the phone and remove battery and put in again.
Cool power on and voilà phone is alive.

Tanks who test and develop the procedure.

1: Attach the phone
2: Unlock RSA
3: Attach the phone and Direct Unlock
4: Attach the phone again and flash FS with this K750_R1BC002_FS_EU3_CID49.fbn
5: Customize file system
6: Attach the phone and flash SW with K750_R1BC002_MAIN_EU_EMEA_CID49.mbn
7: Turn off the phone and Enjoy

100% tested



1: Attach the phone
2: Unlock RSA
3: Attach the phone and Direct Unlock
4: Attach the phone again and flash FS with this K750_R1BC002_FS_EU3_CID49.fbn
5: Customize file system
6: Attach the phone and flash SW with K750_R1BC002_MAIN_EU_EMEA_CID49.mbn
7: Turn off the phone and Enjoy



W800i


1: Attach the Phone
2: Unlock RSA
3: Attach the Phone Again
4: Repair EROM
5: Turn Off the Phone And It's Done.
6: If it's not going to work, you need to full flash the phone.